All Equipment Category Specs ↠ Off-Highway Trucks ↠ Caterpillar 772

Caterpillar 772 Off-Highway Truck

Category: Off-Highway Trucks (See all Off-Highway Trucks for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 772 (See all Caterpillar 772 for sale)

Approximate Weights - Dual Slope

Gross Weight - Empty

112000 lbs (50,803 kg)

Approximate Weights - Flat Floor

Chassis

35 lbs (16 kg)

Articulating/Rigid

Rigid

Body Hoists

Body Lower Time - Float	12.5 sec
Body Power Down - High Idle	12.5 sec
Body Raise Time - High Idle	9.5 sec
Pump Flow - High Idle	136 gal/min (515 l/min)
Relief Valve Setting - Lower	500 psi
Relief Valve Setting - Raise	2500 psi

Brakes

Brake Standards	ISO 3450: 1996
Brake Surface - Front	216 cu in (0 m)
Brake Surface - Rear	7794 cu in (0 m)
Standards	2.74:1

Capacity - Dual Slope - 100% Fill Factor

Heaped 2:1 (SAE)	40.8 cu yds (31 m)
Struck	31.7 cu yds (24 m)

Capacity - Flat Floor - 100% Fill Factor

Heaped 2:1 (SAE)	41 cu yds (31 m)
Struck	30.5 cu yds (23 m)

Dimensions

Centerline Front Tire Width	10.4 ft (3 m)
Centerline of Rear Dual Tire Width	8.7 ft (2 m)
Dump Clearance	1.7 ft (0 m)
Dump Ground Clearance	1.9 ft (0 m)
Dump Height	27.5 ft (8 m)
Engine Guard Clearance	2.4 ft (1 m)
Front Canopy Height	13.9 ft (4 m)
Ground Clearance	2.4 ft (1 m)
Height - Top of ROPS/FOPS	13.5 ft (4 m)
Inside Body Depth - Maximum	5.6 ft (2 m)
Inside Body Length	18.3 ft (5 m)
Inside Body Width	12.2 ft (4 m)
Loading Height - Empty	11.5 ft (3 m)
Operating Width	15.6 ft (5 m)
Outside Body Width	13 ft (4 m)
Overall Body Length	26.9 ft (8 m)
Overall Canopy Width	500 ft (152 m)
Overall Height	14 ft (4 m)
Overall Height - Body Raised	27.5 ft (8 m)
Overall Length	28.7 ft (9 m)
Overall Tire Width	12.9 ft (4 m)
Overall Width	15.7 ft (5 m)
Rear Axle - Clearance	1.9 ft (0 m)
Rear Axle - Tail	8.5 ft (2 m)
Wheel Base	13 ft (4 m)
Wheelbase	13 ft (4 m)

DRIVE SYSTEM

Drive Config

4x2

Dump

Dump Angle	1800
Load Capacity - heaped	41 cu yds (31 m)
Load Capacity - Struck	30.5 cu yds (23 m)
Lower Time	14.7 sec
Raise Time	8.1 sec
Rated Payload	100000 lbs (45,360 kg)

Engine

Aspiration	Turbocharged
Bore	5.7 in (13 cm)
Displacement	1105 cu in (0 m)
Engine Model	Cat C18 ACERT
Gross Power	598 hp (446 kw)
Gross Power - SAE J1995	598 hp (446 kw)
Make	Cat
Max Torque	1988 lbs/ft
Model	C16 ACERT
Net Power	535 hp (399 kw)
Net Power - 80/1269/EEC	535 hp (399 kw)
Net Power - ISO 9249	535 hp (399 kw)
Net Power - SAE J1349	535 hp (399 kw)
Number of Cylinders	6
Peak Torque	1988 lbs/ft
Power Measured @	1800 rpm
Rated Engine Speed	1800 rpm
Stroke	7.2 in (18 cm)
Torque Measured @	Turbocharged rpm
Torque Rise	12.5

Final Drives

Differential Ratio	2.74:1
Planetary Ratio	4.80:1
Total Reduction Ratio	13.15:1

Operating Specifications

Alternator Supplied Amperage	Gear
Body Capacity - SAE 2:1	41 cu yds (31 m)
Brake/Hoist System Fluid Capacity	73 gal (276 l)
Cooling System Fluid Capacity	30 gal (114 l)
Diff and Final Drive Fluid Capacity	42 gal (159 l)
Engine Oil Capacity	14 gal (53 l)
Fuel Capacity	140 gal (530 l)
Hydraulic System Fluid Capacity	35 gal (132 l)
Maximum Capacity	100000 lbs (45,360 kg)
Maximum Working Payload (110%)	112000 lbs (50,803 kg)
Nominal Payload Capacity	22 lbs (10 kg)
Nominal Payload Class (100%)	102000 lbs (46,267 kg)
Not to Exceed Payload (120%)*	122000 lbs (55,339 kg)
Steering System Fluid Capacity	15 gal (57 l)
Tire Size	21.00R33(E4)
Top Speed - Loaded	49.5 mph (79 kph)

Service Refill Capacities

Brake / Hoist / Fan Hydraulic Tank	35 gal (132 l)
Brake/Hoist Hydraulic Tank	100000 gal (378,500 l)
Cooling System	30 gal (114 l)
Crankcase	16 gal (61 l)
Differential - Final Drives	22 gal (83 l)
Fuel Tank	140 gal (530 l)
Steering System - Including Tank	15 gal (57 l)
Steering Tank	9 gal (34 l)
Torque Converter - Transmission Sump	55171 gal (208,822 l)

Steering System

Steer Angle	36 °
Steering Standards	ISO 5010:1992
Turning Circle - Clearance Diameter	ISO 3450: 1996 ft (0 m)

Suspension

Effective Cylinder Stroke - Front	9.2 in (23 cm)
Effective Cylinder Stroke - Rear	5.9 in (13 cm)
Rear axle - Oscillation	5.4 °

Tires

Standard Tire	21.00R33 (E4)
Standard Tires	216

Transmission

Forward - 1	8 mph (13 kph)
Forward - 2	11 mph (18 kph)
Forward - 3	14.9 mph (23 kph)
Forward - 4	20 mph (32 kph)
Forward - 5	27.1 mph (43 kph)
Forward - 6	36.5 mph (58 kph)
Forward - 7	49.5 mph (79 kph)
Max Speed	49.5 mph (79 kph)
Number of Gears - Forward	7
Number of Gears - Reverse	1
Reverse	10.5 mph (16 kph)
Transmission Type	Gear

Weights

Body Weight	22984 lbs (10,426 kg)
Chassis Weight	55171 lbs (25,025 kg)
Empty Weight	78155 lbs (35,451 kg)
Front Axle - Empty	48%
Front Axle - Loaded	34%
Loaded Weight	181000 lbs (82,101 kg)
Operating Weight - Loaded	ISO 5010:1992 lbs (0 kg)
Rear Axle - Empty	52%
Rear Axle - Loaded	66%
Target Gross Machine Operating Weight	181000 lbs (82,101 kg)
Weight Distribution Front - empty	48%
Weight Distribution Front - loaded	34%
Weight Distribution Rear - empty	52%
Weight Distribution Rear - loaded	66%

See all of the Caterpillar 772s we have listed for sale.

A Caterpillar 772 From Finning CAT for $445,000.00 USD

A Caterpillar 772 From MacAllister Machinery Co., Inc. for $385,000.00 USD

A Caterpillar 772 From Bergerat Monnoyeur for $185,000.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon